FUJIYAMA Soap Mold (with extrusion plate)

SOLD OUT

The set includes the main body, a saucer, a partition and an extrusion plate.

Soap Weight: approx. 40 g

The set includes the main body and an extrusion plate, allowing you to create stunning soap bars in the iconic shape of Mount Fuji!

FUJIYAMA Soap Mold lets you make beautiful soaps that stand out. By simply pouring your soap mixture into the mold, you can achieve impressive results that reflect the beauty of Japan's famous mountain. Adding a personalized touch with a soap stamp (sold separately) will make your creations even more unique!

We hope you will enjoy using our soap mold, making the process of soap making even more enjoyable and creative.

【How to use】 ※Please refer to the picture below.

(1) Turn the main body upside down, bottom side up, and cover with plastic wrap, making sure to adhere as tightly as possible since PLA resin tends to make the plastic wrap stick.

(2) Place the plastic wrap-covered side of the machine on the receiving tray.

(3) Pour in the soap and keep warm.
After warming is complete, wait until the soap hardens firmly.

(4) Place the extruder in a container that is taller than the mold.
　(If you are careful when removing the mold, you can push the extruder by hand to remove the mold without using a container.)

(5) Place the main body containing soap on (4) and push it downward.

■ Material / PLA Filament

■ Color / White

■ Size / Please refer to the product photos.

・After unmolding your soap and allowing it to dry for a few days.
　The best condition is neither too soft nor too hard.
(The speed at which soap dries out depends on the recipe and humidity.）

・After use, soak in warm water for several hours and then wash gently with a fine brush.

・This product is made using a 3D printer. Therefore, you may notice surface irregularities, small holes, or thin strands of PLA resin, but these are not defects.
If you are concerned about such details, we recommend refraining from purchasing to avoid any issues.